There’s new 3D printer deals going every month, but they’re usually only on sale for a few weeks at a time, so you can miss out on your dream printer if you’re not quick.

So, to save you time researching and comparing between sites, we’ve categorized every brand and store’s best 3D printer discounts, including for filament and resin, and we keep this updated whenever new 3D printers go on sale.

3D Printer Deals & Discounts

Anycubic

Full list of deals available here – deal available until the end of March 2022
$10 off any orders above $70 with code 10SITEWIDE

Snapmaker

Snapmaker have a FLASH SALE from April 11th to April 17th at 11:59pm PDT.

Get exclusive discounts with our discount code: ASSAVE50-3dsourced

With our discount code, you get the following discounts – just click here for all discounts.

All the discounts include:

Snapmaker Original for $439
Snapmaker A350 for $1499
Snapmaker A250/Bundle for $1099/1399
Snapmaker A150/Bundle for $899/1139
Snapmaker AT/Bundle – 15% OFF
Snapmaker F250/F350 – 15% OFF
Snapmaker Accessories/Add-ons – 15% OFF

Amazon 3D printer discounts

Creality deals

Snapmaker deals

Matterhackers deals

BCN3D Sigmax R19 for $3,749 (from $4,295)

Dynamism deals

3D Printer Filament Deals & Discounts

3D Printer Resin 3D Printer Deals & Discounts

3D Printing Education Deals

Only $1 for 14-day trial of Institute of 3D Printing membership (usually $27 per month!)

How to Choose The Best 3D Printer For Sale

What is your skill level: are you a beginner to 3D printers, or an experienced maker?

Depending on how comfortable you feel with 3D printing, you may opt for a more beginner-friendly 3D printer, such as an enclosed FDM printer like the Monoprice Voxel or Flashforge Adventurer series.

But, if you’re experienced and capable of tweaking and tailoring 3D slicer settings for voxel-perfect prints, then you might want to max out print quality with a resin 3D printer such as those by Anycubic or Elegoo – or even a professional Formlabs printer.

If you’re a beginner and want an easy start, go for a 3D printer with auto-leveling – it’ll save you loads of hassle. They cost a bit extra, but you won’t have to manually level a 3D printer you don’t fully understand yet, and over time you’ll be glad you paid the extra $30 over the best cheap 3D printer deals for a lower-quality printer.

Trust popular 3D printers for hobbyist printing

We’re lucky to have tested over a dozen 3D printers by brands big and small, and know which to go for (check out our best 3D printer article for more details!). But if you’re new, generally the best low-cost 3D printers on sale rise to the top of the best-seller lists, and word-of-mouth travels fast online via YouTube, Reddit and platforms such as ours – usually the best rise to the top.

So if you see printers such as the Creality Ender 3, or an Anycubic printer, topping best-selling lists, it’s because they’re some of the best 3D printer deals around. We recommend Creality Ender models, Anycubic FDM and resin models, Elegoo resin printers, and a few others as the top low-cost options, but you can read our full review in our cheap 3D printer ranking.

Do your research

We’ve published a large number of 3D printer reviews to try and get the key info you need to pick the best 3D printer for sale for you. Especially if you’re dropping over $300, the last thing you want to do is spend all your money and be left with buyer’s regret.

Check out our reviews, as well as other experienced makers’ thoughts online, in the forums, on YouTube, to help decide which is best for your particular main use. For example, if you want to make high-quality figurines and characters, go for a high-quality resin 3D printer like the Anycubic Mono range or Elegoo range.

Factor in all the other costs involved in 3D printing

Unfortunately, 3D printers don’t just run on air and good vibes. Filament, while actually very cheap relative to what you can make (and sell prints for), starts at $20/kg minimum. Tougher filaments will break down softer brass nozzles quickly, and you may want to upgrade your build surface, hot end, or clog your nozzles.

The same goes for resin 3D printing: FEP films need replacing, as well as vats and other parts.

Most sellers readily sell these parts, so you don’t need to worry about being able to source them, but they’ll add to the ongoing total cost of your 3D printer. Electricity is cheap, but replacing a hot end isn’t.

For more info: How much does a 3D printer cost to buy and maintain?

Think about your 3D printing goals

If you want to make detailed characters or figurines, go resin. If you want to print tough functional parts that can survive wear-and-tear, go FDM and pick a tougher filament.

Only you know what you want to get out of 3D printing, and planning ahead for what best suits you will save you regretting one purchase rather than another.

At the same time, think about what specs and power you need to achieve those goals. While it’s tempting to save $100 upfront, if your ambitions heighten and you can’t reach the extruder temperatures you want to print Polycarbonate, for example, you may be left frustrated.

Other articles you may be interested in:

Twitter Facebook LinkedIn Email Copy

3dsourced

We've covered the 3D printing industry since 2017, tested over a dozen of the world's most popular 3D printers, and we're dedicated to being the most informative 3D printing site in the world to help democratize the technology.

Learn More About 3D Sourced